Spotsylvania PlantMetal/Nonmetal

EE was assisting in unloading some equipment. When climbing down from the truck, EE stepped on the lift axle, the tire rolled causing EE to lose balance and fall 3' to the ground. This fall caused knee injury.

Large rocks on the ground ee rolled ankle fell to the ground breaking leg.

Driller Suffered Heart Attack

WHILE WASHING OUT THE BUCKET OF THE MACHINE BELOW THE PRIMARY CRUSHER, THE WATER HOSE BURST CAUSING SOME BRUISING TO THE GROIN AREA.

Associate was cutting a piece of flashing with a utilty knife(box cutter). When the blade reached the end of the rubber, and with the force the associate was using, the blade slipped causing a puncture wound on the associate's upper left leg near the knee (inside thigh). Causing the associate to receive one(1) suture and three(3) staples. The assocate was cleared to return to work.

Tightening the 5 1/2 shorthead crusher and lid that covers the adjustment controls fell closed and contacted his wrist.

Pit loader was driving towards EE in pickup truck. EE stopped to allow right of way to it. Pit loader says sun was in his eyes; did not see pickup truck. The pit loader struck the pickup truck on the driver's side. EE was unable to move by the time he realized the pit loader was not stopping. He suffered a minor injury to his hand. Some metal was removed at a doctor's visit.

LOST FOOTING WHILE CLIMBING DOWN STEPS ON TRUCK, HE GRABBED HANDRAIL & SPUN AROUND, HITTING HIS BACK ON THE TRUCK.

Was attempting to lift 4 by 8 steel plate to position in a screen when he felt a pain in his lower back.

ASSOCIATE WAS WORKING ON NIGHT SHIFT WORKING ON THE 5 1/2 CRUSHER, ASSOCIATE WAS TEPPING DOWN, FOOT SLIPPED OFF EDGE OF CRUSHER AND FOOT LANDED ON CRUSHER BOLTS AND ROLLED ANKLE.

EE WAS USING A 1 1/2"" WRENCH TO TIGHTEN A MUD HOG (BELTSCRAPER) (EE WAS WORKING OVERHEAD) THE WRENCH SLIPPED OFF AND CUT EE ON UPPER LIP ON RIGHT SIDE.

ASSOC MOVING WING PULLEY W/JBC LOADER, PULLEY GOT CAUGHT ON CUTTING BOLTS OF BUCKET, ASSOC GOT OUT OF MACHINE TO MOVE PULLEY OFF BOLTS & THE PULLEY ROLLED OVER MASHING ASSOC HAND BETWEEN BUCKE T & PULLEY.

ASSOCIATE DESCENDING STAIRS @ SCALE OFFICE, KNEE GAVE OUT, WENT TO CATCH SELF & LANDED ON LEFT WRIST FRACTURING WRIST.

OPERATOR WAS OPERATING A ROCK TRUCK HAULING OVERBURDEN FROM AN AREA THAT WAS BEING STRIPPED, RAN OVER A ROUGH AREA CAUSING HIM TO BE JOSTLED ABOUT IN THE SEAT, STRAINED HIS LOWER BACK.

EE GREASING LOADER BUCKET-CAT 988B-FOOT SLIPPED WHILE STANDING ON DOG BONE FELL APPROX. 2 FEET TO THE GROUND.

EE FELL, TIGHTENING SCREEN BOLTS CUTTING LEFT LEG.

EMPLOYEE WORKING IN PIT LOADER AND FELT A BITE/ STING TO THE BACK OF HIS NECK.

EE WAS MOUNTING A GALION RUBBER TIRE CRANE WHEN HIS RIGHT KNEE GAVE WAY. EE STATES HE HEARD IT POP.

WAS SHOVELING MATERIAL ON STEPS AT STATION #3 WHEN HE SLIPPED ON A ROCK AS HE PERFORMED HIS ASSIGNED TASK. EE WORKED SHIFT, THE NEXT SHIFT. TWISTED ANKLE AT HOME PRIOR TO GOING TO DR. RETURNED TO WORK 1-12-01 ON A DR. SLIP

WAS PUSHING FROZEN MATERIAL FROM #5 CONVEYOR BELT END REPORTED HURTING HIS BACK

MECHANIC WAS REPLACING CABLE ON SPRING MOTOR WHEN SPRING SLIPPED, SPINNING SPANNER WRENCH AND STRIKING EE ON BOTH ARMS. EE RECEIVED A FRACTURE TO LOWER LEFT ARM WITH CONTUSIONS. HE ALSO SUSTAI NED A LACERATION TO RIGHT ARM WITH CONTUSIONS.

EE WAS PLACING RUBBER WEAR PLATES INTO #2 SCREEN AND REPORT AN INJURY AND PAIN IN THE RIGHT SIDE OF NECK AND SHOULDER. ON MAY 6, @ 0900AN EE WAS SHOVELING CONVEYOR #3. HE LATER REPORTED ACUT P AIN SATURDAY NIGHT. WENT TO DR. 5-8 RECEIVED FULL RELEASE. RETURN TO DR. ON 5-15, RETURN TO WORK FULL RELEASE. 5-17 WNET TO DR., PLACED ON LIMITED DUTY. NO LIFTING OVER 30 LBS.

EE WAS WALKING ON PIT HAUL ROAD SLIPPED ON COMPACTED SNOW AND FELL TO THE GROUND.